6 Free DIY Bluebird House Plans From Available Materials
Attracting bluebirds is a wonderful way of inviting nature right into your backyard. But to achieve that, you need a bluebird house plan.
Well, there are different types of bluebird house plans you can use to construct a bird shelter. In this article, we share with you 6 plans for bluebird house.
The best part is that it can be done by anyone, not just the avid hobbyists. But before we go there, lets first look at requirements for a bluebird house.
Bluebird House Requirements:
- Should be placed in appropriate locations to prevent competition. You can do that by placing the houses 100 yards apart and put screening trees between them.
- Bluebirds don’t like nesting in shade or deep wood. So you need to place the house in an open area away from trees and buildings.
- Don’t paint your bluebird house. Bluebirds are more likely to use them when left as natural wood. In case you must paint, don’t use dark colors to avoid overheating.
- Always leave the edges smooth to ensure the birds' feathers are not damaged.
- Bluebird houses should be mounted to a height of 5 to 7 feet above the ground. This is to keep them safe from predators.
Now let's see 6 DIY bluebird house plans and hope you can pick up an ideas
1. DIY Bluebird Box for Eastern/Western Bluebird
Warren H. Lauder, a bluebird house expert, designs this bluebird house. His aim is to build a birdhouse for both Eastern and Western bluebirds.
Warren uses wood and shingles to build. The wood is used in all sections. Entry hole and vent holes are drilled into the sides. The vent holes give good ventilation.
The front part is designed like a swing door. This is useful since it makes cleaning much easier. Warren makes the roof slope for good drainage.
The cracks are sealed using caulking compound to keep the rain out. Additional protection from the rain is achieved by covering the roof in waterproof material. Here, Warren uses asphalt shingle.
There are two things you need to note here. The first one is that the wood should be at least 3/4 inches thick. The second one is that you should avoid using particleboard or plywood.
Warren recommends using white pine for its good natural resistance to weather. This is a project you can do alone and only takes a couple of hours.
2. Decorated DIY Bluebird House
The designer of this bluebird house wants something simple, inexpensive yet functional. This is a birdhouse that can be built by DIYers with basic woodworking skills.
The designer uses untreated wooden planks to build the house. Paint is optional, but it is good to give a decorative touch. You can use an oil-based paint to give good water-resistance.
A hole is drilled into the front panel for the bird door. The front panel pivots to give easy access when cleaning or just observing the interior.
A clamp might be a good idea if you plan to build this birdhouse alone. It takes only half a day to build.
3. Bluebird House Kit
Marshall Brain, an avid DIYer, is the man behind this project. His aim is to design a birdhouse kit that is inexpensive and easy to produce.
You can build the kit by yourself or as a youth project Marshall builds it all by himself. He says the assembly process in nearly foolproof. This means there is a high chance of success.
The kit is made in such a way that it is easy to assemble by kids in the age group of 8 to 12 years. It is built using kiln-dried wooden boards. Marshall says you can use plywood as an alternative. Plywood is good especially when you want to keep weight to a minimum.
The kit includes side panels, front and back panels, roof, and floor. The front pivots at the top to give easy access. Holes are drilled for ventilation and access door. Marshall is happy about the project and so are his clients out there.
4. Side-Open Bluebird House
Lesa, an author, and DIYer builds this birdhouse. What she wants is a bluebird house that is easy to clean and lasts for many years.
She builds the house entirely out of wood. One side is hinged so it opens to give easy access when cleaning or inspecting the nest. A latch is installed to let it secure in place for added security.
A hole is drilled into the front panel to create a door. Lesa adds other small holes to act as ventilators. The back panel extends a few inches past the bottom and the top. These extensions make it easy to nail the house on a pole.
Lesa gives notes on very crucial things to make your bluebird house a success. These include bluebird diet and house maintenance..
5. Bluebird House from One Board
The designer of this birdhouse builds it in a way that ensures it uses the least amount of material possible. In fact, this bluebird house is built using nothing but just one board.
The board is cut into panels. These make the front, back, roof, floor, and sides. The panels are assembled together using screws to form a box house.
The designer trims off the floor corners. This is useful to give good drainage. A quarter inch ventilation holes are drilled into the panels so the nest doesn’t get hot.
The front panel pivots open for easy access. It has a hole drilled through to create access door. The roof has a front extension that allows good drainage.
There’s a strip of wood nailed to the back of the house. This is the support piece that is screwed into a pole to hold the house.
6. Common Eastern and Western Bluebird Nest Box
This bluebird house plan is a good choice for beginners. The house is specifically designed for Eastern and Western Bluebirds.
Unpainted wood is used to build this birdhouse. This gives the house a natural look that attracts bluebirds. The designer adds good ventilation to this house. He achieves this through small holes drilled under the roof overhang.
There is a gap between the top of the front panel and the roof. The gap makes air circulation even better.
The front panel pivots at the top and closes and secures to the bottom via a latch system. A hole is drilled through it to create access door for the birds.
I hope you enjoyed this article about bluebird house plans. We love it when you share with friends. But in doing so, please link back to this original post.
Any additional ideas are highly welcomed. Or do you want to share your experience building one? If yes, then do so in the comments section below.